Mold Problems Before & After Photos

A homeowner in Revenel, SC was experiencing mold growth in the home due to a high moisture level in the crawl space. It had only been 6 months since buying the home, and they mentioned air movers had been installed in order to air out the crawl space. Unfortunately, air movers actually accelerate the rate of the humid air entering the crawl space rather than helping to dry it.
In order to find the best solution to keep the crawl space dry and mold-free, they scheduled a free inspection with one of our system design specialists to unveil the full extent of the problem and propose effective solutions. After a thorough inspection, our inspector recommended having a CleanSpace Encapsulation System installed in order to reduce and control the moisture entering the crawl space. Additionally, the floor required additional support in multiple areas so a SmartJack Support System was recommended in those areas.
Our team installed both systems to completely transform the crawl space environment into a clean, dry, healthy space.

This homeowner in Kathleen, GA had the realization that they need to replace their floor system in their home after the installation of their Cleanspace Encapsulation System. The system regulated the moisture under their home and removed excess moisture from their wood. Our team replaced their main beam, floor joist and subfloor.  

This home in Soperton, GA had a gap growing in between the floor and the baseboard of the wall. Our inspector did a thorough investigation of the crawl space and found active termites that needed to be addressed before foundation repairs could be made. After the home was treated by a termite company, our inspector was then able to assess the stability of the floor and found that it was still reliably supportive, but it had weakened, causing the floor to sag in the area there was a floor gap. In order to solve this issue, a SmartJack Support System was installed in the area where the floor was sagging. Then that system was used to attempt to lift the floor into a more level position and stabilize it in place.

Our team successfully repaired this customers damaged joists by replacing and sistering the damaged joists in this crawl space. 

The wooden joists in the crawl space were covered in dark mold and mildew stains due to excess moisture The mold had spread across the wood, creating an unsightly, unhealthy environment. Left untreated, this could contribute to wood deterioration and poor air quality in the home.

After applying Mold X2 Spray, the difference is striking. The powerful formula quickly removed the dark mold stains, restoring the wood to a clean, natural appearance. The joists now look fresh, and the crawl space environment is significantly improved. By eliminating mold growth, Mold X2 helps protect the structural integrity of the wood and creates a healthier home environment.